Microbit RRC-1258 MkII(s) Manual de usuario descargar pdf (Pagina 37)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

37 of 236

Initial IP setup

The default Ip settings from the factory is 192.168.0.227 (Control-RRC) and 192.168.0.228

(Radio-RRC). The net mask is 255.255.255.0. and the gateway 192.168.0.1.

To be able to contact the RRC-units via the network you must configure the units to fit into

your home network. You can check your network configuration from your PC.

On the start menu select Run. In the Run dialog box enter cmd.

You will get a DOS-window.

At the DOS-promt enter ipconfig.

Then you will get the needed information:

Your PC IP address in this example is 192.168.0.101 this means that the IP of the RRC:s must

have IP:s in the area 192.168.0.2 to 192.168.0.255.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 235 236

Sin comentarios

Microbit RRC-1258 MkII(s) Manual de usuario Pagina 37