search

Microbit RRC-1258 MkII(s) Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
16
Remote Site Setup
The Remote K3 must have firmware version 4.48 or later installed.
1. Apply power to the K3 and confirm that it has firmware version 4.48 or later installed. If not, update the
firmware as described in the K3 Owner’s manual.
2. Set the K3 for rear panel mic input and no bias (see the K3 Owner’s manual for details), regardless of
the type of mic used. The RRC-1258 units automatically supply bias.
3. Cable the remote site K3 to the RRC-1258 unit as shown in Figure 12 using the RRMTCBL cable set.
You must use the RRC-1258 unit that does not have the CW knob on the front panel.
Figure 12
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Controles remotos Microbit RRC-1258 MkII(s)
Controles remotos Microbit RRC-1258 MkII(s) Manual de usuario   (146 paginas)
  • Henkel BRP Ducane Milwaukee Milion
  • Braun Hierros Freestyle Relojes de alarma EDIFIER Altavoces Maytag Lavadora Secadora Bose Reproductores de cd
  • Blaupunkt IVMR 7001 LG 34UM88C-P LG IPS235V Pioneer HTP-100 Toshiba G9000
  • LG 42LW650S Manual de usuario Securitron SEPT Manual de usuario Samsung HT-X810 Manual de usuario Whirlpool BSNF 9152 W Guía de uso y cuidado Acer A221HQL Manual de usuario